Since 1990 E.R.T. Has Provided The Harley Owner With Adjustable Oil Pressure


INCREASing OIL PRESSURE TO HARLEY-DAVIDSON SPECS

TWIN CAM installTWIN_CAM_INSTALLATION.htmlTWIN_CAM_INSTALLATION.htmlshapeimage_8_link_0
TECH TIPSOIL_PRESSURE_TECH_TIPS.htmlOIL_PRESSURE_TECH_TIPS.htmlshapeimage_9_link_0
 

The unit is great! And with the aid of the pressure gauge, I have brought up the oil pressure to the correct levels using the PJ-2.  I can now ride in peace, knowing that the most vital part of my engine (most vital component of any engine, OIL) is being fed to all the necessary moving parts.

Thanx again for sending it.   Steven Byrom



I recently received the PJ-2 Pro-Just from you.  I just want to tell you that it does a great job of allowing me to control the oil pressure on my 95 Road King.  Up until now I had increased the oil pressure by adding a spacer above the stock spring.  Although that did help it did not give me consistent oil pressure at both idle and higher RPM.  I believe that was related to the spring rate not being what was needed.  I am now consistently running 35 psi at speeds of 50 mph and above, idle pressure is around 14 psi.   Just want to tell you I am very pleased with the PJ2.

Great product!   Dale Soderstrom



I installed the Pro-Just on my EVO custom.  It works like a dream--I have all the oil pressure I need now.  It is a pleasure to finally buy something for a Harley that works.  Thanks a lot for you help.  I will be telling all the Harley guys that I know about your stuff.

Thanks   Mike Kelley

 


The springs arrived today and all I can say is OMG! Before I changed the spring I had 4 lbs of pressure at idle with a cold engine and 18 lbs at 2500 rpm.  When the engine warmed up I lost all pressure at idle with the red warning light on and the gauge showing 0 lbs and got 15 lbs at 55 MPH.  The engine also rattled and ticked at idle badly.  I installed your blue spring first into a cold engine and got 42 lbs at idle which dropped down to 35 after 5 minutes of running.  I took it for a drive and got it totally warmed up and I now have 12 lbs at idle which increases to 15 lbs at 1000 RPM, 20 - 25 lbs at 2000 RPM and I get 35 lbs at 55 MPH or faster.  It doesn’t go above 35 lbs on the hwy.  I am amazed!! This for sure was the best thing I’ve bought for my bike yet and I’ll be telling any and everyone who’ll listen about what your product did for my Harley.

Thanks very much, Best Regards,   Randy Kain

Since 1990 E.R.T. Products has been dedicated to providing the finest oil system components for Harley-Davidson motorcycles!


Harley-Davidson parts and motorcycles are

our only interest.  All of the HD parts that we manufacture are American made!


I have been working on Harley-Davidson Motorcycles for over 30 years and believe that I have the best, most precise and cost effective products that can be provided to increase and adjust H-D oil pressure to the manufacturers specifications!


I know without a doubt that our products will increase and regulate the oil pressure in the Harley-Davidson engines.  That is why all of our products have a money back guarantee. 


W.J. EMMITT

PRESIDENT

E.R.T. PRODUCTS, INC.

Providing your engine with proper lubrication is critical, whether you have a stock or high performance engine!


If you plan to change a camshaft, install roller rockers, build a stroker, stock rebuild or other engine modifications, using E.R.T. products will ensure that your engine will be lubricated properly.


From day one E.R.T. has always recommended the same oil pressure specifications that Harley-Davidson has set as the standard for their engines. 


HARLEY-DAVIDSON OIL SPECS:

Cold engine start-up:  around 44 psi.

Warm engine at 55 mph and up:  30 to 36 psi.

Warm engine At idle:  at least 10 psi.



If your oil pressure

is not at Harley-davidson specs

E.R.T. will PUT YOU THERE!

AMERICAN MADE PRODUCTS FOR THE HARLEY-DAVIDSON ENGINE

If your Harley Is Experiencing any of these Problems


  Low or no oil pressure at idle

  Red warning light flickers or stays on

  Lifters rattle or noisy at idle

  Engine oil temperature seems high


E.R.T. Products Has Your Answers

Contact us:


Ph  1-765-564-3946


wj_emmitt@ertproducts.com

At E.R.T. We Stand Behind Our Products - Your Satisfaction is Guaranteed or your Money Back !

SUPERPUMPSUPERPUMP-KITS.htmlSUPERPUMP-KITS.htmlshapeimage_23_link_0
PRO-JUSTPRO-JUST.htmlPRO-JUST.htmlshapeimage_24_link_0
PRO-GAUGEPRO-GAUGE.htmlPRO-GAUGE.htmlshapeimage_25_link_0
WET SUMPINGWET_SUMPING.htmlWET_SUMPING.htmlshapeimage_26_link_0
TECH TIPSOIL_PRESSURE_TECH_TIPS.htmlOIL_PRESSURE_TECH_TIPS.htmlshapeimage_27_link_0
OIL FACTSH-D_OIL_PRESSURE_FACTS.htmlH-D_OIL_PRESSURE_FACTS.htmlshapeimage_28_link_0
TWIN CAMSTWIN_CAMS.htmlTWIN_CAMS.htmlshapeimage_29_link_0

e.r.t. products, inc.

What Our Customers Had To Say

ERT PRODUCTSshapeimage_30_link_0
TWIN CAM INSTALLTWIN_CAM_INSTALLATION.htmlTWIN_CAM_INSTALLATION.htmlshapeimage_31_link_0