PROTECT YOUR INVESTMENT WITH THE “ORIGINAL” OIL PRESSURE SPRING KIT


increased oil pressure for THE twin cam ENGINES

TWIN CAM installTWIN_CAM_INSTALLATION.htmlTWIN_CAM_INSTALLATION.htmlshapeimage_8_link_0
TECH TIPSOIL_PRESSURE_TECH_TIPS.htmlOIL_PRESSURE_TECH_TIPS.htmlshapeimage_9_link_0
 

Contact us:


Ph  1-765-564-3946


wj_emmitt@ertproducts.com

At E.R.T. Products


We work with customers every day by phone or email to solve their oil pressure problems!


This is not an inconvenience,

it’s what we do!


We have been building and working on Harleys for over 30 years.


At E.R.T. we Know Harleys and we Know Oil Pressure!


That is why the Superpump-Kit is guaranteed to work or your money back!

SP-TC  Twin Cam Kit


Is the oil pressure in your Twin Cam Engine within Harley-Davidson specs?

If not, our SP-TC Spring-Kit Will put you there!


This high-performance spring kit is designed to increase oil pressure on all 1999 and up Harley-Davidson Twin Cam engines.  Increase your oil pressure by replacing the stock spring in the pressure relief valve of the cam support plate.



TC-EZ Installation Tool

This tool easily compresses the SuperPump spring to install the split pin without scraping or gouging the bore.  It also allows installation of the spring without removing the cam plate!

The SuperPump-Kit


Our high-performance spring kits the SP-1 and SP-TC were designed to increase oil pressure in all Harley-Davidson engines.


Each of our kits contain 3 color coded springs.  Each spring was specifically designed to enable you to adjust your oil pressure up or down depending on your needs. These springs are  made of the finest spring steel known, the same material that is used in Indy car valve springs.


Our products were designed, engineered and manufactured to provide you, the Harley owner with the highest quality product available for your Harley-Davidson Engine.


       


TC-EZ

Installation Tool


Use to Install the SP-TC spring kits or

when working on the pressure relief valve.

 

   SP-TC  SuperPump Kit

   Our 3 spring kit - Includes 3 split pins.

    For use only on the Harley-Davidson Twin Cam engines.

 

$ 20.00

$ 20.00

Harley-Davidson Oil Pressure Specs for the Twin Cam Engine


Cold engine start-up:  44-50 psi

Warm engine at 2000 rpm and up:  30-38 psi

Warm engine at idle:  at least 10 psi




SP-TC

Pro Pack


SP-TC springs

TC-EZ installation tool

3 Split pins

 

$ 40.00







SP-TC

HardCore Pack


The SP-TC springs

TC-EZ installation tool

2 Cam cover gaskets

2 Exhaust gaskets.

3 Split pins




SP-TC

Monster Pack


The SP-TC springs

TC-EZ installation tool

3 Cam cover gaskets

6 Exhaust gaskets.

3 Split pins

 

$ 106.00

$ 70.00

~ Scroll Down To Find ~


  1. BulletTwin Cam Info


  1. shapeimage_25_link_0Installation  Page


  1. SUPERPUMPPurchase The Spring Kit

shapeimage_25_link_0

Twin Cam SuperPump-Kits

SUPERPUMP
shapeimage_25_link_0
SUPERPUMP
shapeimage_25_link_0

SP-TC Twin Cam “SuperPump” Kit


The SP-TC “SuperPump-Kit” is installed in the pressure relief valve of the cam support plate.    We strongly suggest that you use the TC-EZ assembly tool!  By using this tool, you'll only need to remove the cam cover to install the SP-TC.  If you don't use this tool, you will need to remove the pushrods and everything up to and including the cam plate.

INSTALLATION of the SP-TC “SuperPump” Kit

for the Twin Cam Engine


Installing this kit is not going to be a quick 5 minute job, we offer the following advise on proper spring selection.  All measurements are done with a warm engine, 2000 rpm and up. Also, this is a good time to check the wear on the cam chain tensioners.  If you need any replacement parts, let us know.  We can supply these items at very competitive prices!



- Twin Cam Installation Page -

At E.R.T. We Stand Behind Our Products - Your Satisfaction is Guaranteed or your Money Back !

e.r.t. products, inc.

PRO-JUSTSUPERPUMP-KITS.htmlSUPERPUMP-KITS.htmlshapeimage_26_link_0
PRO-GAUGEPRO-JUST.htmlPRO-JUST.htmlshapeimage_27_link_0
WET SUMPINGPRO-GAUGE.htmlPRO-GAUGE.htmlshapeimage_28_link_0
TECH TIPSWET_SUMPING.htmlWET_SUMPING.htmlshapeimage_29_link_0
OIL FACTSOIL_PRESSURE_TECH_TIPS.htmlOIL_PRESSURE_TECH_TIPS.htmlshapeimage_30_link_0
TWIN CAMSH-D_OIL_PRESSURE_FACTS.htmlH-D_OIL_PRESSURE_FACTS.htmlshapeimage_31_link_0
ERT PRODUCTSshapeimage_32_link_0
TWIN CAM INSTALLE.R.T._Home.htmlE.R.T._Home.htmlshapeimage_33_link_0
TWIN CAM INSTALLTWIN_CAM_INSTALLATION.htmlTWIN_CAM_INSTALLATION.htmlshapeimage_33_link_0